1 / 1
SlimeVR case with 1/4" hole for mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SlimeVR case with 1/4" hole for mounting
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 74
- Makes
- 0
- Views
- 567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
SlimeVR case with 1/4" hole for mounting straps compatible with HTC VIVE trackers. For example, EOZ VR straps.
To assemble it… you'll need the 3d printed object, an official SlimeVR tracker, one ruthex 1/4" insert for each tracker, and a soldering iron to melt the surrounding plastic.
If you're unfamiliar with 3d print inserts, see this video:
To print it… I've used a Creality Ender-3 V3 SE with the “Standard Quality (0.2mm)” PLA configuration, adding support with this extra parameters:
- Support Overhang Angle: 33.0º
- Support Pattern: Grid
- Support Z Distance: 0.4mm
- Support Interface Thickness: 1.0mm