SlimeVR GooCase (Custom Case, BMI160, D1 Mini)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact SlimeVr Case. No Glue or screws needed, designed for BMI160 IMUs, Wemos D1 Mini, TP4056 BMS board, 804040 Lipo
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 138
- Makes
- 0
- Views
- 1,017
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Separate the pieces on the print bed! Don't print the lids already snapped on.
This is my attempt at making a compact SlimeVR case. The main features are a tight layout, snap on lids/covers for easy repair and assembly easy access ports. I used a magnetic USB-C adapter for easy charging access. I have tested the lids on all 8 pieces I printed and so far they snap on and hold on well for me, but due to the small geometry this might vary from person to person as printer calibrations can vary.
The components I used are all nearly the default from the SlimeVR components page, with the main choices being the BMI160 and 804040/1800mah Lipo
0.2 and 0.15mm layer heights worked for me, I would still recommend with the 0.15 if possible, there is not much internal volume so use what ever infill you desire, 10 to 20% is strong enough for me. Also do remember to separate the lids