Slimevr Tracker Storage Shelves

TODO: 

1. design wall mounted bases
2. Design some sort of “top” so that the top of the shelf doesnt look unfinished 
3. More custom shelves for your unique cases!

About - This is my first time designing something useful and modular! Please give me feedback on what needs to be improved

Disclaimer!!! - This is my first model!!!!^^^ I suck at this!! The tolerences might not be perfect and please tell me where i could improve it! You may have trouble getting the rods into the base or the shelves onto the rods when their in the base.

How to use - This model comes in many parts, I'll go over everything you need

• Spacers
  • There are two types of spacers, the vertical and horizontal ones. 
  • Vertical spacers - Scale these vertically to be however tall you need it, These slide between each shelf on the same Column to space them apart.
  • Horizontal spacers - Scale these vertically to be however tall you need it. I recommend scaling to however tall the vertical spacers + shelves add up to be so its just one spacer :> There are currently 3 sizes/distances. Small is around 35mm, Medium is around 45mm, Large is around 60mm
    • These spacers are used with their corresponding bases as a extra Column with x size distance between the shelves (charging cables/straps will have room to sit here xD)
  • There are multiple heights for the spacers make sure you stay consistent with the height you choose. I've also realized after modeling every single one of them that you could just vertically scale them to be whatever height you want in the slicer .-. so do that too. Stay consistent with heights - or don't doesn't matter :> if it works it works

• Bases
  • Obviously you cant have them sit on nothing and stand properly. 
  • What you need is the Main base which are for the actual tracker shelves.
  • Small, Medium, and Large bases are just to space them apart from each other :p

• Shelves! 
  • Each shelf has its own individual folder for the Main and Extension trackers. The size i chose for these were an average of the public cases I could find and an estimate on possible tracker sizes. 
  • Print 1 for every Main / Extension tracker you have
  • For each shelf you will also need a Wall mount shelf for each (pls help me find a better name lol)
  • DM me on Discord if you have a custom shelf for your specific case. Pixel#6554
  • This model uses the "Parametric Bobblehead Springs" by 3D Printy

• Vertical Alignment Rod 
  • These are the sides/support/walls of the “shelf”
  • Slide them into all the bases, then side the spacers to space shelves vertically and slide your spacers that go between them. Ez
     
• Center attachment Piece
  • If you look at the base, there are little grooves on there. 
    This attachment piece fits perfectly there!
  • It was my solution to my modeling being bad and the lazy route to the shelves not being straight - It works and it looks fine :> win win
  • You need one for every Two base pieces

Print settings 

You can print any part with any desired layer height :) 0.2 is generally safe. 

Print orientation 

All of the spacers are vertical for scaling convenience. Please orient them to lay on the side that's completely flat afterward. You could print them vertical (im not stopping u soo~) but the edges might be rounded and might not slide smoothly along the parts

Important tips

• You can print a single horizontal spacer that's as tall as whatever height the vertical + Shelves are. Example : Each shelf is 25mm and you would need 2 shelves. At least a 20mm spacer at the bottom and top + maybe 60mm spacer in between the shelves. Total height would be 150mm so print a 150mm tall horizontal spacer.
  • Make sure the vertical rods that everything slides to is 18mm taller than the total height of spacers + shelves (in example it would be 168mm
  • Top lids will be made soon so the top of the shelves don't look ugly!
• Print one Base for each size of spacer you choose to use (otherwise how else will it fit :/
• Printing the spring is optional if you think its too much of a hassle… you will just have normal shelves xD
• The Base alignment things aren't required but they look cool and fill the gap :p they also were made to keep the shelves straight. 
• The shelves were made to slide smooth/loosely, because of this the extension shelf needs these little fillers to not move around make sure to print two! one on each side.
• I might have forgotten something here… my brain is dumb but- Have fun!
• Please like my model if it helped you organize your trackers :> thanks~