T36 - Nerf Blaster - Beta
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am designing this half length Dart Blaster possibly resembling a famous german assault rifle/ carbine.
- Ocena
- 4,5 / 5
- Polubienia
- 699
- Pobrania
- 934
- Wydruki
- 2
- Wyświetlenia
- 13 116
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Main features:
Half length dart blaster
K25/K26 spring powered
Real steel-esque proportions
Sturdy design with heat set inserts, M3x500mm threaded rods
Straight forward assembly
Spring-loaded prime return (if desired)
Easy to print parts, machined parts don't require fancy machinery (jigs for metal parts included)
smooth mag release
Talon Mag Compatible
ball bearing and linear rod guided butter smooth prime
Total print time <20 hrs.
Min. Print Volume: 256x256x256 mm^3
If you are interested in hardware components or full blaster builds, feel free to reach out for further information.
Do not use in public. Especially with realistic color schemes (like my examples). Do not use without an orange tip, as people might not be able to distinguish the blaster from a real rifle.
______________________________________________________________________________________________________________________________
BOM:
This is a cart with all the stuff that I got for developing the blaster as reference:
https://amcs.to/6zqup
________________________________________________________________________________________________________________________________
Firing Demo:
Assembly tutorial:
Part fabrication tutorial:
________________________________________________________________________________________________________________________________
Print files updated continuously while in Beta phase...
//Rev Log
Added Multicolor Front shroud files
Added loose trigger arm pin
added stock spacer
added receiver A for M4 insert instead of hex nut
added faux charging handle and Talon Mag spring
Updated receiver Single B V2 to make wedge spring install easier
Added Flash Hider .stl //2026.04.17
________________________________________________________________________________________________________________________________
Future endeavors:
-hardware reduction and accessibility improvements: e.g. printed bearings and dowel pins…
-vert. Front grip (printable)
-Design of a G36 IDZ Stock to be interchangeable with the classic stock.
-faux suppressor