Pixel Watch 4 Travel Charger Puck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-piece flex charger puck to help store and manage the Pixel Watch 4 charger with its non-removable cable.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 250
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two-piece flex puck to hold the Pixel Watch 4 watch charger and its attached (non-removable) cable.
The original idea came from this Pixel Watch 4 Charger Puck by @Drop_3D.
I wanted to play with printing flex filament and to design a puck that could completely stow the charger cable for travel. It actually worked out pretty well!
Designed in FreeCAD, printed on a Prusa XL, 0.4mm nozzle, 0.2mm structural profile.
The top half is to be printed upside-down from flexible filament. I printed it in Overture Blue TPU (95A) with three perimeters, and 15% cubic infill. (This makes the top everting part effectively solid.)
The bottom-half is to be printed rightside-up from normal rigid filament. I used Jessie Yellow Bird PLA and printed it with the default two perimeters, and 15% cubic infill.
I printed both parts with concentric bottom infill (out of personal preference for looks).
Both parts should print fine without supports or brim.