Pixel Watch 4 Travel Charger Puck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece flex charger puck to help store and manage the Pixel Watch 4 charger with its non-removable cable.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 1
- Views
- 250
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two-piece flex puck to hold the Pixel Watch 4 watch charger and its attached (non-removable) cable.
The original idea came from this Pixel Watch 4 Charger Puck by @Drop_3D.
I wanted to play with printing flex filament and to design a puck that could completely stow the charger cable for travel. It actually worked out pretty well!
Designed in FreeCAD, printed on a Prusa XL, 0.4mm nozzle, 0.2mm structural profile.
The top half is to be printed upside-down from flexible filament. I printed it in Overture Blue TPU (95A) with three perimeters, and 15% cubic infill. (This makes the top everting part effectively solid.)
The bottom-half is to be printed rightside-up from normal rigid filament. I used Jessie Yellow Bird PLA and printed it with the default two perimeters, and 15% cubic infill.
I printed both parts with concentric bottom infill (out of personal preference for looks).
Both parts should print fine without supports or brim.