Qidi Q2 riser nozzle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
noticed the riser cap model on here, when printed right and wedged in, held in rigid enough to double well as some kind of holder, so i caded this up
o.g model: https://www.printables.com/model/1580108-qidi-q2-qidibox-stock-riser-cap
make sure you scale or adjust for shrinkage in slicer, it should wedge in tight and hold firm with little to no wobble.
also add: https://www.printables.com/model/1633105-qidi-q2-riser-locking-cap
in rear hole if you want door to only slide one way open and close
one side has small lip so orient on flattest side for printing with no supports
100% infill
i printed with 0.4 and 0.08 layer height in white abs
most other filaments should work too