Multiboard 3M Claw Mount Snap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Multiboard Snap designed for 15lb and 25lb 3M claw wall drywall hangers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Apartment living has always made me hesitant to drill holes in my walls; so I came up with a Multiboard mounting snap that allows the use of 15lb and 25lb 3M drywall hangers (it might be compatible with the larger hooks as well; I don't have any to test with...). It's compatible with the 6.25mm bolt locked Multiboard mounts and the 6.25mm Multiboard snaps. Some of the 3M claws ended up slightly crooked by the time they were pressed in, which required slightly offset mounts in order to keep the Multiboard tiles level-- so I have also included the +/- 1mm and + 2mm offset mounts as well.
I printed them with a 0.2mm layer height using a 0.6mm nozzle and they came out well both face-up and face-down.