LayersFactory
Zgłoś model
1 / 1
Exposed NVMe Frame // JMS583 + 2260 Edition — zdjęcie 1

Exposed NVMe Frame // JMS583 + 2260 Edition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EngineeringDIYplus

EngineeringDIYplus

@EngDIYPlus_4174308

A sleek PCB frame featuring a slide-in hexagonal mesh lid for maximum airflow and heat dissipation.

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (2)Kolekcje (1)Powiązane

Exposed NVMe Frame // JMS583 + 2260 Edition

A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs. This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that prioritizes both aesthetics and extreme thermal management.

The Design

Built with a "skeletal" philosophy, this enclosure features a slide-in hexagonal mesh lid. This allows for maximum passive airflow, preventing the JMS583 chip and the NVMe drive from thermal throttling during heavy file transfers. The 2260 form factor makes the entire footprint incredibly pocketable while maintaining a rugged, structural feel.

Technical Specifications & Print Settings

Optimized specifically for ABS or ASA to ensure the enclosure doesn't warp under the heat generated by high-speed NVMe drives.

  • Material: ABS or ASA (Recommended for heat resistance up to 90°C+).

  • Nozzle: 0.4mm.

  • Layer Height: 0.2mm (0.12mm for the hex-mesh lid for better detail).

  • Supports: Minimal/None

  • Hardware Required: * JMS583 USB-C to NVMe Bridge PCB.

    • M.2 2260 SSD.

    • Small M2 screws/standoffs (depending on your specific PCB mounting holes).

Assembly Notes

  1. Slide-Fit: The hexagonal lid is designed with a tight tolerance. If your ABS shrinks significantly, you may need to scale the lid by 1-2% on the X/Y axis for a perfect glide.

  2. Thermal Pad: I recommend using a thermal pad.

Note: This is an "exposed" design. It offers great cooling but remember that it is not waterproof or dust-proof. Use it on your desk or in your tech bag with pride!

Tagi

enclosurestoragessd