EVGA Z15 Keyboard Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet for the EVGA Z15 Keyboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
Replacement feet for the EVGA Z15 Keyboard.
There are 2 Versions of the feet: Spring and screw.
The spring version of the feet should be printed in a slightly bendy material, like PETG. Should snap in place. Printed with PETG at 0.12mm layer height.
The screw version can be printed out of anything. It requires 2x M2.5x5mm screws. These screws are screwed into the holes in the side of the foot. One side should be screwed in halfway before being slotted in, then fully screwed in once in place. Printed with PETG at 0.12mm layer height.
Screw one of the M2.5x5mm screws in all the way, screw the second one in halfway
Place the foot in the slot
Screw the screw in so that it holds on
All done!
