6 inch Wall Mount Ducting/Pipe Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal, Vertical and 45 degree clamps designed for my woodworking shop 6" ducting.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Anyone need to mount 6" dust collection tubing? I was not able to find any models to hang my tubing from my walls, so here is my take on them. They are designed to screw into existing studs in 3 orientations to meet all of your needs. They use 6' stainless steel hose clamps (https://a.co/d/0eHsNJiM).
Notes:
I printed in PETG and used no supports in the orientations pictured. Getting the supports out of the hose clamp channel is a PITA. At first I printed these horizontally for stength, but these are plenty strong as is and the clamp holds everything together.