Core One+Cereal Drybox Side Clip - Bayonet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cereal box drybox clip mount for the Core One+ intended to be used with bayonet connector to be removable.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I really loved the model from metasyntactic for the side clip mount for a cereal container drybox. However I did not want to "permanently" mount the clip to my Core One as I want to still be able to use spools outside of cereal dryboxes. I am also hoping to keep the bayonet mount for (hopefully) future compatibility with the Prusa USS Drybox.
One downside to my remix is the clip does stick out the side of the Core one a little more, however the drybox is still perfectly secure. The remixed clip and bayonet connector sits as close to the Core One as possible.
It is very easy to attach and detach the clip to the bayonet mount, there is plenty of room to make the quarter turn needed.
Recommended to print in PETG like the original models. Assembly is done with 2 screws which should easily self-tap into the bayonet connector. Place the o-ring around the bayonet connector as shown.
The bayonet connector with screw holes needed is here:
Hardware needed:
1x Rubber O-ring 25x3.5 mm (Prusa Recommends type: EPDM 70 ShA.)
2x m5x8mm screws with button head (no larger than 10mm diameter head) (the length can be from ~6-10mm)