1 / 3
Bottom feet (30mm tall feet) with built-in caps — zdjęcie 1
1 / 3

Bottom feet (30mm tall feet) with built-in caps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified bottom feet for the Galaxy Mini Rack system. 30mm tall feet and screw caps built into the holes.

Ocena
5 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
116
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Modified the original design to have taller feet to allow better airflow underneath (I have 2 mini pcs on a shelf on the bottom).  Enough room to add a 10mm thick pc fan as well.  The screw caps are kind of a pain to get into place on the original, so I merged them with the model so they are one piece.

Print with the legs standing up (see picture) and I just used tree support and it came out great.  I would recommend using PETG to print this.

I would recommend Hdarfjkelandfdj's remix of the rail that has the caps integrated as well.

Tagi