Stackable Dehydrator Trays for fruit, art, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat stackable trays to put in your food dehydrator (e.g, Ninja Foodi dehydrator) or just anywhere you need air flow
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Necessity is the mother of invention. The Ninja Foodi air fryer dehydrates food - but they only give you one rack. Nice, but this means I can basically do half of an apple or maybe 1 banana. Boo.
While this is designed to fit inside the Ninja Foodi Air Fryer, it really is multi-faceted. Anything flat that needs ‘drying out’ either in a food dehydrator or just in the open air can benefit from these trays.
(If you DO have a Ninja Foodi, specifically the DZ201 model, I was able to stack this 4 high and got me 8 racks between the two units. Enough for 4 apples!)
I do need to list out precautions as we do know the risks of 3D printed things as it pertains to food and moisture, so:
USE AT YOUR OWN RISK. As I said, 3D printed materials and food is quite controversial. If you are sensitive to this or just get the heebie-jeebies, by all means, don't download it.
Additionally, I STRONGLY recommend coating this with a food safe epoxy.
If you do download it, print in PETG, ABS or any other higher-temperature material. DO NOT USE PLA. PLA will warp at the temperatures needed by a food dehydrator.
Max temperature that these can handle is 175F or 80C. If PETG is safe for your AMS for filament drying, it's safe for a low-temp food dehydrator as well.
Do not wash in a dishwasher. See above.
Do not leave in the air fryer where it could get ‘cooked’. You'll have a big problem on your hands.
One tray's dimensions (mm) are: 190D x 135W x 27H. Surface is 4mm thick.
Enjoy!