Stackable Dehydrator Trays for fruit, art, etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat stackable trays to put in your food dehydrator (e.g, Ninja Foodi dehydrator) or just anywhere you need air flow
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Necessity is the mother of invention. The Ninja Foodi air fryer dehydrates food - but they only give you one rack. Nice, but this means I can basically do half of an apple or maybe 1 banana. Boo.
While this is designed to fit inside the Ninja Foodi Air Fryer, it really is multi-faceted. Anything flat that needs ‘drying out’ either in a food dehydrator or just in the open air can benefit from these trays.
(If you DO have a Ninja Foodi, specifically the DZ201 model, I was able to stack this 4 high and got me 8 racks between the two units. Enough for 4 apples!)
I do need to list out precautions as we do know the risks of 3D printed things as it pertains to food and moisture, so:
USE AT YOUR OWN RISK. As I said, 3D printed materials and food is quite controversial. If you are sensitive to this or just get the heebie-jeebies, by all means, don't download it.
Additionally, I STRONGLY recommend coating this with a food safe epoxy.
If you do download it, print in PETG, ABS or any other higher-temperature material. DO NOT USE PLA. PLA will warp at the temperatures needed by a food dehydrator.
Max temperature that these can handle is 175F or 80C. If PETG is safe for your AMS for filament drying, it's safe for a low-temp food dehydrator as well.
Do not wash in a dishwasher. See above.
Do not leave in the air fryer where it could get ‘cooked’. You'll have a big problem on your hands.
One tray's dimensions (mm) are: 190D x 135W x 27H. Surface is 4mm thick.
Enjoy!