D&D Tabletop Camp Fire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,36 € – 0,44 € netto (bez VAT)
Dla pliku: DnD Camp Fire v1_0.15mm_PLA_Prusa MK3.5_29m32s.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,40 € netto (środek widełek).
- Masa podana przez autora
- 3 g
- Czas druku podany przez autora
- 30 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A miniature D&D campfire prop featuring a built-in LED lighting system for a realistic, immersive glow effect.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
When playing D&D with friends we came upon a scene where it was described we were approaching a camp fire with figures around it. This sparked the idea of creating a camp fire that would light up and so I created one.
Features
Houses a small LED found on Amazon. 10PCS Colorful High Brightness Mini LED Lights Display(Golden Yellow)
LED snaps in. No glue or hardware needed!
The LED retention features are intentionally asymmetric to ensure correct LED orientation, allowing the push button to align with the wider gaps for proper fitment
Press the bottom of the LED assembly to click it on and off
Print in place
Supports are optional but recommended. Using them helps ensure accurate internal features and clean geometry. That said, successful prints have also been achieved without any supports.
Example Print Settings
Material: Polymaker Panchroma Translucent PLA
Nozzle: 0.4mm @ 225°C
Bed: PEI @ 55°C
Layer Height: .150mm to 0.2mm
Max Volumetric Speed/Flow: 16mm³/s
Infill: Gyroid(minimal infill required)
Brim: 2mm for extra peace of mind
Supports: Recommend but not needed
Note:
Print using some from of translucent filament.
My examples are also painted to add more dynamic color.
Sorry for the inch scales but they are smaller than 25 mm in diameter.
Thank you for visiting my page! If you enjoyed this model, your likes and ratings are greatly appreciated and help support future creations.
Products
Disclaimer:
Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.
JD3D is not responsible for any damage or harm caused by improper production, assembly and use.
All images of Printed parts are real but may have some lighting or color correction. AI is only used for backgrounds.