D&D Tabletop Camp Fire
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: DnD Camp Fire v1_0.15mm_PLA_Prusa MK3.5_29m32s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A miniature D&D campfire prop featuring a built-in LED lighting system for a realistic, immersive glow effect.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 36
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
When playing D&D with friends we came upon a scene where it was described we were approaching a camp fire with figures around it. This sparked the idea of creating a camp fire that would light up and so I created one.
Features
Houses a small LED found on Amazon. 10PCS Colorful High Brightness Mini LED Lights Display(Golden Yellow)
LED snaps in. No glue or hardware needed!
The LED retention features are intentionally asymmetric to ensure correct LED orientation, allowing the push button to align with the wider gaps for proper fitment
Press the bottom of the LED assembly to click it on and off
Print in place
Supports are optional but recommended. Using them helps ensure accurate internal features and clean geometry. That said, successful prints have also been achieved without any supports.
Example Print Settings
Material: Polymaker Panchroma Translucent PLA
Nozzle: 0.4mm @ 225°C
Bed: PEI @ 55°C
Layer Height: .150mm to 0.2mm
Max Volumetric Speed/Flow: 16mm³/s
Infill: Gyroid(minimal infill required)
Brim: 2mm for extra peace of mind
Supports: Recommend but not needed
Note:
Print using some from of translucent filament.
My examples are also painted to add more dynamic color.
Sorry for the inch scales but they are smaller than 25 mm in diameter.
Thank you for visiting my page! If you enjoyed this model, your likes and ratings are greatly appreciated and help support future creations.
Products
Disclaimer:
Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.
JD3D is not responsible for any damage or harm caused by improper production, assembly and use.
All images of Printed parts are real but may have some lighting or color correction. AI is only used for backgrounds.