1 / 4
Organic Monitor Speaker Stand — zdjęcie 1
1 / 4

Organic Monitor Speaker Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5 part organic monitor speaker stand with variable legs.

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Organically shaped, strong and light speaker stands for monitor speakers. 

One stand consists of 5 parts: 

  • One frame element that can be printed from various materials (I did mine from PETG with 2 walls and 20% infill, 0.24mm layer height with 0.6mm nozzle, but this can be varied, can definitely be printed from PLA, ABS, ASA, even TPU with an additional wall for extra stiffness).

  • 4 Feet from TPU (I printed mine out of 95A TPU, 2 walls and 3 top/bottom surfaces, 10% gyroid infill, print speed <60mm/s, 0.18mm layer height with 0.6mm nozzle, here the softer - the better, yet be careful not to compromise their integrity as monitors tend to be HEAVY).

To install the legs just insert them into the frame on their narrow side and twist until they lock into place.

In total to print one stand with a 0.6mm nozzle (all parts included along with filament changes) took 1 hours on my CC1 and less than 50g of material combined.

If there's a need for a tilt - two of the legs can be swapped for shorter/taller ones. I've added an additional option to print 2cm+2cm tall legs on one side and 2cm+0.5cm on the other for a 10 degree tilt, but feel free to experiment with leg sizes here and remix them for your needs. 

Overall I'm very satisfied how this came out and my home monitors already are on these and they look/work great!

Tagi