Pointy Robotic Legs for CARBON 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robotic leg with detailed mechanical look
- Ocena
- 0 / 5
- Polubienia
- 73
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 2177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The robotic leg design is from my original character "PA-MF03 Komatsuna". Leg 3D model was done quite some time ago. I tried to make it 3D printable with the filament hinge method but no success, things turns out too loose and I can barely assemble things at 100% scale since my printer isn't that well tuned.
I really like CARBON 13's joint design, it prints well and assembly is straight forward. So I adapted these joint designs to my own model.
This model is mostly for aesthetics since these pointy feet makes it hard to pose standing. If she's a real robot there'd be gyro sensors and micro adjustments to help her keep balance, I guess.
To assemble a whole leg you'll need some parts from soozafone's original CARBON 13 Type-F post.
"joint_f_elbow_2x-v6" for the foot joint.
"body_f_hip_2x_v3" for hips.
Mirror the "PA-MF03_thigh" part to get right thigh.
Knee and kneecap may need to be glued together AFTER the assembly.
Print in the orientation as provided with built-in support.
I printed mine with 250% scale, 0.2mm layer height, 0.4mm nozzle, PETG.