Pointy Robotic Legs for CARBON 13
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A robotic leg with detailed mechanical look
- Rating
- 0 / 5
- Likes
- 73
- Downloads
- 176
- Makes
- 0
- Views
- 2,159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The robotic leg design is from my original character "PA-MF03 Komatsuna". Leg 3D model was done quite some time ago. I tried to make it 3D printable with the filament hinge method but no success, things turns out too loose and I can barely assemble things at 100% scale since my printer isn't that well tuned.
I really like CARBON 13's joint design, it prints well and assembly is straight forward. So I adapted these joint designs to my own model.
This model is mostly for aesthetics since these pointy feet makes it hard to pose standing. If she's a real robot there'd be gyro sensors and micro adjustments to help her keep balance, I guess.
To assemble a whole leg you'll need some parts from soozafone's original CARBON 13 Type-F post.
"joint_f_elbow_2x-v6" for the foot joint.
"body_f_hip_2x_v3" for hips.
Mirror the "PA-MF03_thigh" part to get right thigh.
Knee and kneecap may need to be glued together AFTER the assembly.
Print in the orientation as provided with built-in support.
I printed mine with 250% scale, 0.2mm layer height, 0.4mm nozzle, PETG.