HILTI BA22 CPC TO NURON ADAPTER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HILTI BA22 CPC TO NURON ADAPTER
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1
4x 3mm nails of 20mm length for clips
2x springs for clips - we used default springs from ender3 heatbed (20mm length, 8mm diameter, 0,9mm wire)
4x 14mm M3 screws
4x M3 nuts
15mmx0,3mm copper grounding tape for contacts
2x 150mm copper wires 2,5mm2 for connecting contacts
5 to 10 kOhm resistor between "T" and "-" contacts on the BA22 CPC part to simulate the baterry thermistor value
it needs a bit of sanding and filing for smooth running of the clipping mechanism
when making the contact fold the copper tape in half and glue a corresponding printed part to it to cut it and sand it to the size and then coat it with tin
to insert a contact to the holder use a solder to heat it up a bit and push it inside.
then solder the wires to the contacts, use as small amount of heat as possible, to not melt the plastic part
you can use your fantasy to make the contacts from other materials as the 0,3mm tape is a bit weak for the nuron side
recommended materials:
Contact holders - ABS, PC
Clips - ABS, PC
rest - PETG