Jacket for your Convipen/Gansulin - ConviJacket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Are you tired of the same old teal Convipen? Now the only limitation is your filament colors!
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 667
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you tired of the same old teal Convipen? You're looking at an ultra-low-profile protective jacket designed specifically for your ConviPen auto-injectors.
This jacket features a precision-engineered 42.6mm x 10.8mm viewing window that perfectly aligns with the dosage display.
Key Features
Ultra-Thin Profile: The wall thickness is engineered to exactly 0.6mm to keep the jacket lightweight and unobtrusive.
Support-Free Printing: Designed to print vertically with zero supports.
Recommended Print Settings
Layer Height: 0.2mm
Wall Generator: Arachne
Seam Position: Back, aligns the seam to the back of the cylinder
Supports: None required
Brim: I print on a CryoGrip so I don't use a brim, but add a brim if you need one.
Material: I've only printed with PETG & ASA, PLA should work without issues.