1 / 1
Rosewill 4000 2x140mm + 1x120mm Fan Mounts — zdjęcie 1

Rosewill 4000 2x140mm + 1x120mm Fan Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plates to clip-mount 2x140mm fans and 1x120mm fan into the front of some of the Rosewill 4000 4U cases.

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases.

My particular case is the Rosewill RSV-L4000U, but other cases with the same hard drive cage style should be compatible with these mounting plates.

This 2x140 + 1x120 setup is designed for cases with removable front-panel button assemblies. If you install all three of these fan brackets, you won't have a place on the front of the case to mount your front-panel button assembly.

Note that these brackets cannot be re-arranged from their prescribed order - the case holes that they clip into are asymmetrical.

I printed these in PETG-CF with an 0.8mm nozzle. However, I would assume that any PETG, PLA, and standard nozzle should also work.

Keep in mind that PLA can sag and creep in warm conditions over time.

I printed these face-down with no supports. The clip geometry has an aggressive overhang, so do print with supports if needed to preserve those clips.

Tagi