1 / 1
Rosewill 4000 2x140mm + 1x120mm Fan Mounts — image 1

Rosewill 4000 2x140mm + 1x120mm Fan Mounts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plates to clip-mount 2x140mm fans and 1x120mm fan into the front of some of the Rosewill 4000 4U cases.

Rating
0 / 5
Likes
3
Downloads
18
Makes
0
Views
155
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases.

My particular case is the Rosewill RSV-L4000U, but other cases with the same hard drive cage style should be compatible with these mounting plates.

This 2x140 + 1x120 setup is designed for cases with removable front-panel button assemblies. If you install all three of these fan brackets, you won't have a place on the front of the case to mount your front-panel button assembly.

Note that these brackets cannot be re-arranged from their prescribed order - the case holes that they clip into are asymmetrical.

I printed these in PETG-CF with an 0.8mm nozzle. However, I would assume that any PETG, PLA, and standard nozzle should also work.

Keep in mind that PLA can sag and creep in warm conditions over time.

I printed these face-down with no supports. The clip geometry has an aggressive overhang, so do print with supports if needed to preserve those clips.

Tags