Counting matching models…
Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…
Store four Rosewill RSV-series hard disk sleds in Alexandre Chappel's second-favorite grid-based modular desktop storage system! Since Rosewill only sells sleds pre-installed in cages, you either have no loose caddies, multiples of four…
Wall mounts and connectors for 120mm fans to connect together and make a wall of 360mm fans to help the Rosewill RSV-R4000U case have the adequate airflow it needs. Wall mounts just screw into the side of the case using a couple of the…
I misplaced the rails to mount HDDs into the trays of my server housed in the rosewill RSV-L4500, so I designed these and they fit perfectly. The spacing is standard so there is a good chance they'd fit in other trays. Category: Electronics
I bought this food dehydrator on Amazon to dry out filament: https://www.amazon.com/dp/B018UR4XJI?psc=1&ref=ppx_yo2_dt_b_product_details However, there was not enough vertical space to house my old filament spools. Therefore, I made some…
Abandonware. It might get some info later but for now here we are There are 2 versions, a flush mounted version and a version that is about 15mm deeper(setback). Either way, print one of each SideL,SideR,LatchRail,SmoothRail,Backplane.…
Can be mirrored to produce left and right pairs
There are 4 different options of 1-4 ssd mount. Uses M3x8mm screws for the ssds and M4x15mm screws for mounting to bar.
Print 4 parts in order to form a full spacer, the parts are designed with a simple interlocking system that allows it to slot into each other, technically no need for glue etc unless you want it to be permanent. Designed as close to 1:1…
This is a bracket with 4U server cases like the Rosewill 4U Server (RSV-R4000U) which come with the front panel I/O mounted horizontally preventing insertion of a 3rd Rosewill RSV 4 x 3.5-Inch HDD Cage RASA-11001 . By mounting it…
the front fan mount already has a grille so would defeat the purpose of the noctua high efficiency fan grille so i integrated the grille pattern to the front fan mount. Updated the legs for the four mounting screws for better printing…
I am porting my original designs from Thingiverse, below is the original description (https://www.thingiverse.com/thing:4729914) This is a custom design for converting a RoseWill RSV-4500 server case to be a 48 drive capable DAS. This…
This is an under desk DVD drive mount, that was remixed from ryodoan's Dell DVD mount. The dimensions of my Rosewill external DVD drive were a tad larger than that of the Dell DVD drive, so the X, Y, Z dimensions all needed to be…
Will fit most 19inch rackmount chassis with enough clearance on top (4u or 5u only). I can fit 30 drives in my L4500 15 bays model with an ATX Motherboard/PSU and 8 original fans, just add to move the middle fan bracket a little (some…
Use this to turn your Rosewill 4U rackmount case into one with hot-swap SAS drive bays! The existing bays are nice with the tool-less drive trays, but are difficult to swap drives if you are upgrading or have problems. This design reuses…
Preface These models are intended to be used as an “add-on” to @SJB4127 's original files for the Rosewill RHFD-15001 Dehydrator (Amazon not linked as their links break constantly), specifically two 90° walls in their section titled “…
10inch rack for 10 inch Rosewill RSV-SATA-Cage-34 + JetKVM Rack (https://a.co/d/37Nv8Fi) with accomodations for 2 jet kvm's. Built for my personal homelab build. print with atleast petg, with front facia on build plate.
I got a Rosewill RSV-R4000U 4u Server chassis basically for free but there was no cable management bar in the case like the photos on their website state so I designed my own. Has slots all down the profile of it for zip ties to do cable…
The EU severn model is a little too large for the Rosewill Dehydrator found on Amazon.
I designed and printed this in 2019, but it was a poor design, and I rarely required it. I printed it with PLA, not thinking that the temperature for dehydrating PETG is too hot an environment for PLA. After printing all the parts for the…
For Rosewill RSV-L4412U 4U server chassis, will support up to 360mm AIO's and fans in push pull. Pressure fit, however if you wish it has enough thickness and height to be screwed in with heat sets on both sides with the stock holes in…
Wanted to be able to safely store my external hdd in vertical position without possibility of falling. Created two versions depending on preferences, a simplified two-piece stand and a full length version. I've included the Solidworks…
These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases. My particular case is the Rosewill RSV-L4000U, but other cases with the same hard drive cage style should be…
I printed Inobrevi's remix of SJB4127's Dehydrator Filament Dryer walls . I measured my Rosewill trays and mistakenly thought Inobrevi's remix would fit. Measure once, and all that; 22 print hours later, ironically I find I need another…
These mounting plates include tab features that clip into existing holes on certain Rosewill 4500-series 4U rackmount cases. My particular case is the Rosewill RSV-L4500U, but other cases with the same hard drive cage style should be…
These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases. See pictures to identify the type of hard drive cage and clip holes that I designed these for. I have personally…
These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases. My particular case is the Rosewill RSV-L4000U, but other cases with the same hard drive cage style should be…
Got a rosewill 2U RSV-72700 Server case for free to build a pc in and couldnt find anywhere where to get the motherboard standoffs. Found tons of forums where alot of people had the same issues and Rosewill killed off this part of their…
If you're like me, you have a short Rosewill 4U Server (RSV-R4000U) case and want to rack mount it in a short rack (mine is 21.5in end to end). The best metal rail set I've found is the TC-RAIL-20 but it only supports racks with minimum…
These mounting plates include tab features that clip into existing holes on certain Rosewill 4000-series 4U rackmount cases. My particular case is the Rosewill RSV-L4000U, but other cases with the same hard drive cage style should have…
After removing the DVD drive from my wifes PC, I couldn't find the original bay cover. It was an odd shape and I wanted to retain the visuals so I drafted up a quick design and it worked like a charm. Hopefully this will help anyone else…
Replacement handle for 4U Rosewill rack-mount cases. One of my handles broke, preventing me from using the door/air filters. Designed this so I could use them again. Print with at least 30% infill. DO NOT USE THIS TO LIFT/CARRY THE…
I found that the stock fans were too loud for my server. I decided to replace them with quieter fans. I tried using the existing fan cage with the quieter fans but the design didn't allow that. Here's my solution and now it's yours too.…
Overview The non-extended should take up roughly the same footprint as the regular cages, and the Extended will allow for HDD's that are missing the middle mounting hole to be mounted (Like some of the weird 8TB Seagate HDDs). This…
Bought the Rosewill Thor NAS Case with 2x SATA hotswap blocks. The objective was to remove 1 sata hotswap block to use on another machine. They only provide 2 replacement front covers while the hotswap blocks requires 3. Installed it at…
Rosewill doesn't sell spare caddies for their RSV-4412 cases and RSV-SATA-Cage-34, but if you've somehow got spares, don't leave them naked and afraid. Enrobe them in this handy protective sleeve. You should probably print this in…
🖥 Rosewill ACA502B Reinforced ATX Tower Feet Replacement 📝 Introduction The original feet on the Rosewill ACA502B ATX tower are a weak point in an otherwise solid case design. The factory feet are prone to cracking, especially if the case…
🛠 Introduction The stock fan controller PCB in the Rosewill ACA502B is left completely exposed inside the case. Besides looking unfinished, it leaves the board vulnerable to contact with surrounding cables and makes it difficult to…
This is a 120mm fan housing for the Rosewill RSV-R4000U 5.25" x 3 slot. I didn't have a need for the 5.25" slots, so I added an extra 120mm fan. It's not perfect but it worked for my needs.
This is a set of rail brackets I designed for my rosewill case. I've tried it with the deep 4u case and the shallow one. It should work with any rackmount equipment provided it's at least 2u and there is 3/4in of clearance on either side…
