16mm Adapter for Dehydrator Walls (Rosewill)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 16mm adapter for SJB4127's Dehydrator Filament Dryer walls.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I printed Inobrevi's remix of SJB4127's Dehydrator Filament Dryer walls. I measured my Rosewill trays and mistakenly thought Inobrevi's remix would fit. Measure once, and all that; 22 print hours later, ironically I find I need another <s>22mm</s> 16mm to fit my particular dehydrator trays firmly. That's ok, I can make a print for that! And subsequently a second one, once I figure out the first one was too big. One print to rule them all. And lo, THIS is that print! [evil cackles]
0.2mm LH, 3 walls, 15% Cubic, ABS.
Update:
Turns out, I needed 16mm, not 22. Measure once, print thrice. I removed the 22mm adapter. I'm gonna go sit in the corner and ponder my mistakes, now.