16mm Adapter for Dehydrator Walls (Rosewill)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 16mm adapter for SJB4127's Dehydrator Filament Dryer walls.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed Inobrevi's remix of SJB4127's Dehydrator Filament Dryer walls. I measured my Rosewill trays and mistakenly thought Inobrevi's remix would fit. Measure once, and all that; 22 print hours later, ironically I find I need another <s>22mm</s> 16mm to fit my particular dehydrator trays firmly. That's ok, I can make a print for that! And subsequently a second one, once I figure out the first one was too big. One print to rule them all. And lo, THIS is that print! [evil cackles]
0.2mm LH, 3 walls, 15% Cubic, ABS.
Update:
Turns out, I needed 16mm, not 22. Measure once, print thrice. I removed the 22mm adapter. I'm gonna go sit in the corner and ponder my mistakes, now.