Rosewill 4500 120mm Fan Mounts (120x3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plates to clip-mount 120mm fans into the front of some of the Rosewill 4500 4U cases.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
These mounting plates include tab features that clip into existing holes on certain Rosewill 4500-series 4U rackmount cases.
My particular case is the Rosewill RSV-L4500U, but other cases with the same hard drive cage style should be compatible with these mounting plates.
Note that this 120x3 setup is designed for Rosewill cases with NON-removable front panel button assemblies.
Instructions:
print two of these: "rosewill4500_120x3_any". They are the same size as the stock HDD cages and can be clipped into any spot where a stock HDD cage could go
print one of these: "rosewill4500_120x3_right". This model is slightly longer on the right side, to take up a few mm of extra space.
You could also just print three of the rosewill4500_120x3_any, but you'll have a few mm's gap between the rightmost fan bracket and the front edge of the case.
I printed these in PETG-CF with an 0.8mm nozzle. However, I would assume that any PETG, PLA, and standard nozzle should also work.
Keep in mind that PLA can sag and creep in warm conditions over time.
I printed these face-down with no supports. The clip geometry has an aggressive overhang, so do print with supports if needed to preserve those clips.