1 / 1
Rosewill 4500 120mm Fan Mounts (120x3) — zdjęcie 1

Rosewill 4500 120mm Fan Mounts (120x3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plates to clip-mount 120mm fans into the front of some of the Rosewill 4500 4U cases.

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

These mounting plates include tab features that clip into existing holes on certain Rosewill 4500-series 4U rackmount cases.

My particular case is the Rosewill RSV-L4500U, but other cases with the same hard drive cage style should be compatible with these mounting plates.

Note that this 120x3 setup is designed for Rosewill cases with NON-removable front panel button assemblies.

Instructions:

  • print two of these: "rosewill4500_120x3_any". They are the same size as the stock HDD cages and can be clipped into any spot where a stock HDD cage could go

  • print one of these: "rosewill4500_120x3_right". This model is slightly longer on the right side, to take up a few mm of extra space.

You could also just print three of the rosewill4500_120x3_any, but you'll have a few mm's gap between the rightmost fan bracket and the front edge of the case.

I printed these in PETG-CF with an 0.8mm nozzle. However, I would assume that any PETG, PLA, and standard nozzle should also work.

Keep in mind that PLA can sag and creep in warm conditions over time.

I printed these face-down with no supports. The clip geometry has an aggressive overhang, so do print with supports if needed to preserve those clips.

Tagi