Rack Rails Support for Rosewill Cases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rail mount your server with parts from home depot!
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 40
- Makes
- 0
- Views
- 1,034
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of rail brackets I designed for my rosewill case. I've tried it with the deep 4u case and the shallow one. It should work with any rackmount equipment provided it's at least 2u and there is 3/4in of clearance on either side available for the drawer slides.
You can print test.stl to see if your drawer slides will fit.
You'll need quarter inch pan head bolts and matching nuts to mount it. This was designed for a round-hole rack but it should work with a square hole rack too without the rack nuts.
Rails should be printed right side up like the screenshot with the support blocker as shown. There are pre-configured 3mf files. Print in whatever plastic you have that will resist layer splitting.
The slides are the following product:
https://www.amazon.com/Hardware-3-Section-Extension-Bearing-Capacity/dp/B082XWPVXQ/
They are commodity drawer slides and can be found under many names/brands. The holes in the model are designed to work with the screws that come with the slides. You will need to drill additional holes in either the drawer slides or the server chassis to mount it. Minimum 2 holes per rail.