1 / 3
Atwood RV Stove Gas Guard — zdjęcie 1
1 / 3

Atwood RV Stove Gas Guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fixture to keep burner knobs of an Atwood CV-35BP RV gas stove in the off position.

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This fixture will keep the gas burner controls of an Atwood CV-35BP RV cooktop in the off position. The fixture is easy to push on. It is readily removed by pressing the top of the knob as you pull the fixture off.

The burner knobs are 80mm center-to-center and approximately 52mm (2 in) diameter.

This was printed in PLA at 0.2mm STRUCTURAL and default slicer settings. No supports are needed when the top of the fixture is placed on the print bed.

Tagi