1 / 3
Atwood RV Stove Gas Guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixture to keep burner knobs of an Atwood CV-35BP RV gas stove in the off position.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This fixture will keep the gas burner controls of an Atwood CV-35BP RV cooktop in the off position. The fixture is easy to push on. It is readily removed by pressing the top of the knob as you pull the fixture off.
The burner knobs are 80mm center-to-center and approximately 52mm (2 in) diameter.
This was printed in PLA at 0.2mm STRUCTURAL and default slicer settings. No supports are needed when the top of the fixture is placed on the print bed.