1 / 4
Saw Guide for Rotary Switches with 6mm Plastic Shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little jig to flush cut plastic shafts that are too long, intended for 6mm Rotary Switches (e.g. Lorlin CK Series)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Little clamping jig to flush cut plastic shafts that are too long:
intended for 6mm Rotary Switches (e.g. Lorlin CK Series)
firmly holds the switch in place when used in a vice (successfully tested with PCTG filament)
intended for Japanese dowel saws (= flush cutting saws with no bent sawteeth)
I recommend that beauty here: https://www.dictum.com/dictum-akagashi-duebelsaege-170/712166
Hint: use z axis scaling to configure the shaft length