1 / 2
Hyundai Kona Electric 2020 frunk attachment — zdjęcie 1
1 / 2

Hyundai Kona Electric 2020 frunk attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frunk attachment for the Hyundai Kona Electric 2020

Ocena
0 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
321
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

General

I liked the design of the attachment to screw down but the other model only fits for the 2018 Kona. So I redesigned it. For my car I did a version with lock nuts because due to vibrations normal nuts can get loose.

The 600x400x183mm fits very tight in height. I recommend using a 600x400x120mm box. As you see, with the two charging cables and an extension cord there is plenty of space in the 183mm box.

For finding the correct position to drill in the box you can first screw down the aluminum bar. Then place a very small drop of nail polish in the middle of the screw and set the box on top. So the spot is marked and you can drill through the box.

Components

Happy printing :)

If you have any questions don't hesitate to contact me.

Tagi