Liczymy pasujące modele…
A Remix of the "Tesla Model 3 2021 Frunk Hook" that fits - no tape needed. Just give it a firm press into the frunk hole. Longer as well to prevent the hook from popping out when something is hooked to it like I experienced with the…
Just remove the two existing bolts at the top of the frunk tube and insert the hooks. The hooks are not necessarily directional (ignore the “L” indicating left on the bottom). Recommend using a material that doesn't melt in the heat of…
I do occasionally sell the finished product on my Etsy store: https://www.etsy.com/uk/listing/1047496097/valve-index-dual-fan-frunk-mod-set?ref=shop_home_active_1 Before you continue please read: I am not responsible for any damages that…
Also needed: - 2 mm x 20 mm thick aluminium bar, cut into a 33,5 cm and 29 cm pieces - Rubber attachments, removed from the original cover - a box 600x400x120 mm with a lid - nults and bolts to attach the bar to the box. All materials can…
To avoid smaller items rolling around in my Tesla Model 3 (2021) frunk, I was interested in a secure post or two that I could attach items to. The Model 3 has two adjacent bolt wells in the frunk that can double as securing points. NOTE:…
EN Small tool to keep the frunk lid open on the Volvo EX30. Simply attach as shown in the photo and slide to the height of the hinge if necessary. DE Kleines Hilfsmittel um den Frunkdeckel am Volvo EX30 offen zu halten. Einfach wie im…
See remixed designs. Included files for printing the rubbers in TPU, but did not test this. I did test the moulds to cast the rubbers with polysiloxane and silicone chaulk. The polysiloxane is with shore 65 a bit too hard to remove from…
Adds support for using a box as a Frunk in the Hyundai Kona. Designed to be printed on smaller printers like the Ender 3. Need to connect the two parts using glue or similar method. Print List: 1x Large_Part_A 1x Large_Part_B 1x…
Add grocery hooks to your Model 3 frunk! Requires a Tesla Model 3 built on or after August 2020 . Supported frunks will have two holes on the inside of the frunk weather stripping, each containing a single bolt. See pictures for correct…
Print upside-right so any droop from the bridge is hidden. Recommended settings: Material: ASA or PETG Layer Height: 0.2mm Top Fill Pattern: Hilbert Curve It is snug and hard to rotate once pressed in place so make sure you line it up…
An easy printable, the Tesla Self-Tapping Frunk Hook by Toucan21 on Thingiverse. Note: Sample part photos used PLA with 15% infill (not visible) for testing, the original designer suggests 50%. "This grocery/bag hook combines 2 other…
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
A remix based off of RandomMode's dual fan design I used their model files to create a single fan variant, as I didn't want to use two fans. This model also includes a slot for a SDPT switch to turn the fan off and on. I don't include a…
This is an insert to level the floor of the Tesla Model 3 frunk so it can be used for pizza/carry out without the toppings sliding to one side. Print instructions PETG or ABS recommended to better handle outdoor temperatures unless you…
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Just the open sourced STP file from Valve's github about the Index hardware, converted to STL for your convenience. Category: Video Games
This will fill the FITS socket in the Frunk of the Mustang Mach-E. Including STP and .F3D data for your modification. It is notched to allow for accessories to be added to it and changed out. Same basic concepts as FITS itself, but allows…
I do occasionally sell the finished product on my Etsy store: https://www.etsy.com/uk/listing/1065848597/valve-index-minifan-dual-fans-frunk-mod?ref=shop_home_active_1&frs=1 Before you continue please read: Before you continue please…
Kleine TPU Stopfen um die Löcher zwischen dem Radlauf und dem Frunk im Tesla Model 3 zu verschließen, damit weniger Dreck und Wasser auf Bauteile wie die Bremsleitungen geschleudert werden kann. Um die Löcher auf beiden Seiten im Frunk zu…
A cover for the frunk emergency release button modeled on the 2023 stock cover. and based on the design by @mattkay This will fit trucks that did not ship with a cover. (2022/2023, maybe some later trucks?) it should snap right onto the…
A cover for the frunk emergency release button modeled on the 2023 stock cover. This will fit trucks that did not ship with a cover. Print in ABS/ASA or other material that will have adequate temperature resistance.
These collars can be used to adapt the Rivian frunk lid so you can continue to use it with the Rivian-Aftermarket 12 gallon frunk water tank. Print all models upside-down with build plate supports.
General I liked the design of the attachment to screw down but the other model only fits for the 2018 Kona. So I redesigned it. For my car I did a version with lock nuts because due to vibrations normal nuts can get loose. The…
Store your Tesla AC and DCFC adapters neatly. Hang on any vertical surface. I plan to put mine in the frunk with 3M VHB tape.
This model modifies the OEM frunk cargo net and L-track system ( https://shop.tesla.com/product/cybertruck-front-trunk-l-track-_-cargo-net ) to hold the net vertically. This makes it much easier to contain grocery bags and other soft,…
I wanted a version of https://www.thingiverse.com/thing:3735353 but I wanted to securely mount the fan, so I made this. Enjoy. Category: Replacement Parts
3D scanned and reverse engineered frunk latch from my 2023 Ioniq 5 EV. Slight cosemetic differences from OEM part.
Version 2 notes: I noticed that the index_hmd_accessory_inclusion_zone.stp CAD files released here https://github.com/ValveSoftware/IndexHardware/tree/master/Headset is incorrect. Specifically, it doesn't take into account the front,…
Valve Index Frunk USB hub. Four port usb hub to fit into the index frunk, made for full body tracking setup for VRChat; since i was getting poor performance having moved my vr setup into different room to my PC. I tore down a usb hub,…
This will fill the FITS socket in the Frunk of the Mustang Mach-E. Including STP and .F3D data for your modification. It is notched to allow for accessories to be added to it and changed out. Same basic concepts as FITS itself, but allows…
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
General I liked the design of the attachment to screw down but the other model only fits for the 2018 Kona. So I redesigned it. For my car I did a version with lock nuts because due to vibrations normal nuts can get loose. The…
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Adjustments to https://www.thingiverse.com/thing:5445669 Original work by Vithar https://www.thingiverse.com/Vithar Original post by Vithar: Made as a quick response to the request in this forum post:…
Model years 2021-2024, possibly fits 2025 but not tested. Used PLA with 15% infill.
Print from at least PETG for the heat resistance. Sand the area that the part will be glued to. Sand the underside of the 3D print aswell for a strong bond. Use superglue. I tried 2-part epoxy but it didn't bond well to the Polypropelene…
A simple Index frunk plate replacement, mostly meant for custom mods, or other modelling uses. It may be rather difficult to print due to it's orientation, personally, I just used a lot of supports and went real slow. The model is NOT…
This is a cover for the Frunk Escape Button on F-150 Lightnings. Just use some double sided tape on the base to adhere to the truck. Then just slip the cover on. Print it in glow in the dark material to make it look more OEM!!!
Put this together for an expo. Printed the button with 5% infill. Mid section is 150mm x 500mm PVC downpipe.
I imported the model from Valve's official 3D Files into PrusaSlicer. I was suprised that this model wasn't already uploaded so people could print spares! (My logo on the front is just a sticker, not part of the model)…
