1 / 7
Valve Index Mini Fan Dual Fans Frunk Mod — zdjęcie 1
1 / 7

Valve Index Mini Fan Dual Fans Frunk Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mini fans for the Valve Index.

Ocena
0 / 5
Polubienia
2
Pobrania
43
Wydruki
0
Wyświetlenia
569
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I do occasionally sell the finished product on my Etsy store: https://www.etsy.com/uk/listing/1065848597/valve-index-minifan-dual-fans-frunk-mod?ref=shop_home_active_1&frs=1

Before you continue please read:

 

Before you continue please read:

I am not responsible for any damages that could occur from bad wiring/soldering, I use my fan mod daily and I haven't had any issues so please only make this if you're experienced.

Please use 5v fans! as we're going to be powering them from the USB in the frunk.

This design doesn't require any supports, It's all snap-fit.

What's needed:

You can also get:

  • Heat Shrink Tubing

Printing:

Layer Thickness: 0.20mm
Infill: 15%-20%
Infill pattern: Grid/Gyroid

MAKE SURE THE MODELS ARE SITTING FLAT ON THE BUILD PLATE! (I didn't orientate them correctly, please note the image for reference.)

Print all objects as shown in the Slicer image, No supports needed!.

Assembly:

Once everything is printed, make sure the fitment of the fans is snug inside of the cover. (if it isn't snug you could secure it with a dab of hot glue/superglue)

Wire the Fans, Switch and Usb together then push the USB through the hole inside out. Then with the USB lock press it over until the pins poke through the holes. This will make the USB secure and not get pulled out.

Conclusion

And you should be finished! It's quite a lengthy process but great fun to do and you get a product that really helps with longer play sessions in VR.

If you wish to tip me for this creation that would be most appreciated!

Disclaimer: Please do not sell this design! Any questions then please do leave a comment.

Tagi