1 / 2
ebike emoto case for ili9341 2.8" 320x240 ESP32 — zdjęcie 1
1 / 2

ebike emoto case for ili9341 2.8" 320x240 ESP32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ebike housing for the ILI9341 2.8" display.

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Ebike housing for the ILI9341 2.8" display. The housing is made of several parts. A glass pane of max 1mm (0.5mm is better) should be cut by hand from liquid plexiglass. The frame and plexiglass should be glued to the housing with strong double-sided liquid tape or some glue. The holes in the housing are for 1.6-2mm screws. Printing parameters: 100% infill, 0.16 layer. The ESP32 room fits inside.

Tagi