1 / 2
ebike emoto case for ili9341 2.8" 320x240 ESP32 — image 1
1 / 2

ebike emoto case for ili9341 2.8" 320x240 ESP32

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ebike housing for the ILI9341 2.8" display.

Rating
0 / 5
Likes
1
Downloads
29
Makes
0
Views
205
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Ebike housing for the ILI9341 2.8" display. The housing is made of several parts. A glass pane of max 1mm (0.5mm is better) should be cut by hand from liquid plexiglass. The frame and plexiglass should be glued to the housing with strong double-sided liquid tape or some glue. The holes in the housing are for 1.6-2mm screws. Printing parameters: 100% infill, 0.16 layer. The ESP32 room fits inside.

Tags