Dripper connector for 7mm inner diameter pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a connector for connecting a dripper to a pipe with an inner diameter of 7mm. I will disassemble the dripper I
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
This is a connector for connecting a dripper to a pipe with an inner diameter of 7mm.
I will disassemble the dripper I purchased and reuse the parts.
There were no suitable screws. They are slightly too large, so please file them down. Since the purchased parts include silicone gaskets, a slight discrepancy is not a problem.When connecting PETG parts, please use a water-resistant adhesive.
Please pay attention to the printing direction.
Printed with PETG at 100 infill.
If it comes off due to water pressure, please use the following.
https://www.printables.com/model/1743616-9mm-tube-joint-holder