Dripper connector for 7mm inner diameter pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a connector for connecting a dripper to a pipe with an inner diameter of 7mm. I will disassemble the dripper I
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This is a connector for connecting a dripper to a pipe with an inner diameter of 7mm.
I will disassemble the dripper I purchased and reuse the parts.
There were no suitable screws. They are slightly too large, so please file them down. Since the purchased parts include silicone gaskets, a slight discrepancy is not a problem.When connecting PETG parts, please use a water-resistant adhesive.
Please pay attention to the printing direction.
Printed with PETG at 100 infill.
If it comes off due to water pressure, please use the following.
https://www.printables.com/model/1743616-9mm-tube-joint-holder