No.11 X-Acto blade OTF keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an Out The Front (OTF) Blade that I design to utilize extra X-Acto blade I have lying around
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 189
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
This is an OTF knife I design to use No.11 X-Acto blade but you can use it without the blade for fidgeting. It also have some challenging features that I use to tune my DIY printer:
Thin features in the Slider & Spring Combo for bed adhesion
Small gaps (0.15mm) between the spring and the slider for tolerance
Small 45 degree overhang + tolerance in the sliding joint
Tolerance for sliding, assembly of parts
Long parts in the case that might warp on low adhesion beds
I print the latches with brim ears for better adhesion, the file for it is also included.
Here is the assembly instruction:
Please keep in mind that the tolerance might not fit your specific printer, but you can use the X/Y Compensation to tune it