Liczymy pasujące modele…
Prints properly (enough) with 0.2mm layer, as oriented. The cap fits knife with 8.0mm diameter holder (8.3mm diameter knurling). The first few cappings are tight, but it smooths out with a nice “click”. When capping/removing, hold where…
UPDATE 16.05.2025: Some files were corrupted. These have been updated now.
Remix of xacto knife cap by kitlaan . If you use knife pen with 10mm diameter, this may work for you as well.
Model should load in the proper orientation. .2 layer height, 3 wall loops, no support
A simple yet plenty strong storage solution for your most used tools in two variants. The holder mounts firmly onto the Skadis pegboard. Variant 1 (extended) can hold: 2 screwdrivers 3 rows of bit holders 1 plier 1 exacto knife 1 tweezer…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. This design takes the smaller exacto knives - I have excel and…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. This design fits two of the medium exacto knives and a single…
holds xacto knife and blade holder/dispenser for honeycomb wall
Remix of the xacto knife case storage box for honeycomb wall. The attachment point is changed to use the correct sized hex insert that will snap into a honeycomb wall. Will need supports for the hex
I didn't actually find a holder for a name brand Exacto knife for the Honeycomb Storage Wall. So here we go. Just print it upside down. You might need to scale up or down as needed, if it doesn't fit in the empty inserts. half to 1%…
Exacto knife holder for 1x1x2 multibin shell. You will need to print the Top Click Rim as well. Print face down w/o supports.
Holds an exacto knife and room for 4 blades. Each compartment is sloped at the end to allow for quick and easy access. takes up 1x3 gridfinity spots
A simple remix of Drew's excellent model to support both of my most used design tools Here is the TinkerCAD link if you want to further modify the design: https://www.tinkercad.com/things/k0HsyWvG3AR-gridfinity-caliper-xacto-holder-v2
I like Printable Hobby Knife by pggibson. After decades of suffering through using stock aluminum handles, which tend to loosen and/or seize up, I have found this design to be much better. this design should work with #s 11, 10 15 and…
Two different variations of an Xacto knife holder that fits into 4x1 Gridfinity base. Has holes for magnets. See pictures. I printed on draft 0.24 layer height in PLA with 10% honeycomb infill. 2 top layers, 1 bottom layer. 2 wall loops…
Features: Includes 2 model files: Handle and Sheath . Easy to assemble: Simply push a standard exacto knife blade into the slot for a snug fit. Compatible with standard exacto knife blades. Optional: Attach a keychain ring for…
I really liked the Gridfinity X-Acto Knife Holder, but found that it held my X-Acto Gripster very precariously. I took the STL into fusion and opened up the holder so it would allow the Gripster to go further in. While I was there, I…
Pretty self-explanatory. I printed mine with 2 top and bottom layers at 0.24mm layer heights, 10% crosshatch infill, precise walls, with 2 wall loops.
Made a 1x4 gridfinity bin for my xactos Just did a single filament colour change at a layer height to get the rim
Updates 1/23/25 ** Created/differentiated a square vs rectangular shape designs (they are sorted in folders below). If you print the square version, it may not complicate scaling issues for you if you find that you have them. I recommend…
Exacto knife blade cover for 5/16" (8mm) tool. Using a brim is recommended due to low surface area contact with the print bed. Use of PETG is also recommended because a PLA test sample lost most of its press fit over a short time.
Designed for Xacto Knife Handle (~.3"/7.8mm diameter) Uses a 2-56 screw to lock the depth Recommended to print in SLA Clear resin for best visibility when cutting
My favorite handle but have it printed in an up right position it takes almost x3 more time that on its side. So i just cut it and now you can print it faster and it is much more durable cause the layer lines are bigger that way other way…
Gridfinity Xacto Knife Holder for 5 knives and extra blades
Added a depth stop to protect the tip of the blade being damaged by the cap. Hole diameter is 8.2mm.
Simple x4 XACTO Knife holder with spare blade tray. Push fit for Multiboard snaps. Printed on Bambu X1C using grey PLA pro filament as pictured.
Gridfinity storage bin for your exacto knives and blades, including a magentic blade pickup tool for safe handling of the sharp blades. Requires a 6x2 magnet to be inserted in the tool. I got my inspiration from this model:…
I made this for an exacto set I purchased that didn't come with a cover. The original measurements for the lower case are: 39.9mm x 129.5mm x 10.8mm. This is designed to slide over the top so I don't lose any of the blades in the set. I…
Gridfinity XACTO Gripster Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a different…
Edit: With this model, the knife is easier to hold, and the holder gains a new function.
The original model does not fit on the A1 Mini print bed, because the A1 mini only fits at max 4x4 Gridfinity units. So I got rid of one of the two blade containers, moved some things around, remodelled the xacto spare blade box slot with…
Stanley XActo knife and blades case with pickup points for handle.
UPDATE 16.05.2025: Some files were corrupted. These have been updated now.
the top and bottom parts are printed separately and snap together at the hinges. this can take a bit of force, so I would recommend doing this before inserting the blade. I would also HIGHLY recommend printing the blade inserting tool. It…
V1.3 Coming soon Cap and Fusion 360 file. V1.2 Coming Soon Working on the tolerance. V1.1 4/17/19 I updated the dimensions and the style of the exacto knife. Here are the changes… Collet 1) The thread is now 15mm long. It was 10mm before.…
Print Settings 2-3 perimeters 10% infill no supports rest is up to you
35mm 1x4 Gridfinity bin designed to hold 2 craft/Exacto knives. For reference, in the included image the knife with the knurling(generic Amazon cheapy) and the other knife (Exacto brand) have a diameter of ~8.1mm Note: The knives in this…
This is my take on a 3D printable Exacto Knife! There are various models on Printables which contain different combinations of features I was looking for in this tool, but none of them got it perfect, so I made my own! The cap attaches to…
A case for Xacto knives or pens- a remix of Whity's Rugged Box. Insert is made from TPU. Disregard the inlay on the top and the message on the inside. I made this for my daughter's art class and felt that she needed reminders.
Pegboard holder for masters brush cleaner and 2 xactos Category: Tool Holders & Boxes
This is an Xacto Knife Handle I designed loosely inspired by a design I can no longer find on any website. The cap requires bridging of around a centimeter, so sufficient cooling is recommended. Requires 1x M2.5x4 Countersunk Screw This…
Just a simple holder to attach your DeWalt Exacto Knife to your pegboard. Print these pegs off to attach to your pegboard. Universal Peg Board Peg System
Little container for exacto knifes, can hold 4 (or more) different sizes
Description: This is a 3D printable version of the Sardine Knife by Jimmytronics, which I modeled in Fusion 360. All credit goes to them for the design of this model. As always, I am not liable for any injury that is caused by the use of…
An ergonomic X-Acto blade holder built on the Gridfinity system. The goal of this design is to make accessing and storing the X-acto knife as easy as possible while ensuring the danger end is secure. Required Materials: - 6mmx2mm Magnets…
The original design by @Magmabow is a fantastic design but i had trouble printing it with my 0.6mm nozzle. as such, this project was born. Includes a slide safety. Uses M3x8 screws and nuts (x2). no glue required.
Made a tray for my hobby drawer for the xacto kit I got for minitures
My Xacto #2 knife didn't come with a safety cap like the smaller #11 sized knives do. I designed this in Tinkercad. I printed in Prusament PETG with the open end up and the top on the build plate. I used balanced profile with the 4mm HF…
Keep your Exacto knife readily accessible and safely stored with this versatile pegboard holder! This design allows you to hold your Exacto knife with the blade facing up and capped, for safe storage and easy retrieval. For times when you…
Just a simple model to keep a size 2 Xacto knife from rolling off the bench and sticking in the floor or my foot. Printed in TPU, it's a snug fit that stays put. Works great, and now I don't have to do a little dance every time my Xacto…
1x4 bin for an Xacto Knife. Remixed from a 2x4 that included a spot for a deburring tool.
Thought the two parts was unnecessary so I made this. My tolerances were a little low, so I've widened the throat a little in this version. Might extend it to fit even larger/longer blades as well, and make the stop part of the single…
Just a cool pocket knife I made using an exacto blade. Uses adjusted files from the original.
When I was around 10 years old, I got this set of X-ACTO® knives with assorted blades in a very nice wooden box with an absolutely horrendous plastic insert. Many, many, many (too many) years later, I created a new insert. Some of the…
🔹 Simple protective cover designed to snap over a standard hobby knife blade when the knife is not in use. 🔹 Helps prevent accidental cuts while protecting the blade edge during storage, transport, or while the knife is resting on the…
An XACTO blade pen thing, im not really sure what to call it, fits under a 9mm base-wide blade. Initially threading the cap onto the pen may be difficult, it was for me, I recommend using two pliers to initially thread the cap and repeat…
This is my take on an X-Acto Gridfinity bin since I couldn't find a model that satisfied all my requirements: deeper footprint and snug fit to help secure the knife scabbard slot for blade protection easy finger relief spare blade storage…
I wanted a very fine pointer to use while calibrating the steps/mm on my X-Carve CNC. This little adapter allowed me to fit the collet of an Xacto knife into the stock 1/4" collet of the Dewalt router. I could then use it as a very…
I have included blades that can be found on Temu and originals also. Features: No slip of the blade Easy Swapping of blades Easy to print Fast Print <10min Comes with protective cover for personal carrying Only Two Parts How to use is…
HSW Holder for Exacto/Xacto/Hobby Knife With some parameters. Don't get your hopes up, it was made in F360 and afaik you can only change the parameters in Fusion, sorry but I don't know OpenSCAD, yet at least. When I printed it, it was a…
Suggested by friend AKC comes a hex bit holder to glue on the back of a 11mm Xacto blade handle. Includes a space for a 4mm round magnet to keep the hex bit in place. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution: 0.2…
Fits 8mm diameter xacto knife and 25mm pegboard. Print upright with supports
Hold your pen or Exacto knife on you work bench or desk right were you need it. I Glued both of mine down so I never loose my pen or Exacto. No support needed
Printed with adaptive layers (.3mm +/- .1mm) with a .6 CHT nozzle. Wall count/infill specs aren't particularly important, use your best judgement. I did 4 walls/10% gyroid. My knives are two different sizes and the spare blades came in…
Internal magnets inserted mid print using a M1 command to pause magnets used are 5mm x 2.5mm prints in place with a 0.4mm tolerance gold boarder is printed using prusaslicers multi-material single extruder mode
Simple design for a relatively small 3D printed knife that uses an Xacto Blade. Superglue is likely necessary to reliably hold the blade in place for frequent uses. Only 3 pieces, with a variation to have the keychain ring go through the…
Edit: Definitely check out the remixes if you’re considering printing my model. There are two improved versions that look pretty decent! :) small keychain for an exacto knife blade. easy to print with a 0.5 mm gap in mechanism. Screws in…
**Updated** I printed it then realized I have exactos with long covers and were a little hard to pull out so I made 2 version one for short and long covers and extended the aread to make it easier to pull out the exacto Remixed the…
Rather than dedicating a 1x4 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try. The insert fits inside an 1x4, or can be used stand alone on your work surface. Optional models: Model B (squares at both ends)
Xacto Knife tray insert for Gridfinity with 1 slot. Rather than dedicating a 1x4 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try. The insert fits inside an 1x4, or can be used stand alone on your work…
Xacto Knife tray insert for Gridfinity Rather than dedicating a 1x4 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try. The insert fits inside an 1x4, or can be used stand alone on your work surface. This two…
This is a Gridfinity module designed for Zack Freedman's Gridfinity system. It holds 1 sharpie, 1 exacto knife, and a lot of extra blades. I printed this at .20mm layer height with 15% infill.
Pegboard Hook for xacto blade. Needs supports to print correctly.
This is a slim retractable keychain for xacto hobby knife blades. I use Stanley Blades, other brands may differ a bit with dimensions and format. This is a remix from DoopyWoppy Z11 Blade Keychain Knife. Since I'm left handed I remade the…
Cap for an ExactoKnife with a diameter of 11mm. Takes about 20 minutes to print at 0.2 layer height.
i made a useful compact keychain that Contain a very sharp x-acto blade 11 video of the model and how to install the v2 is 30% smaller than the v1 please tell me what you think? 🙏
Remixed Xacto blade keychain ready to use with CarabinerBuckles System I made to carry small EDC tools with any carabiner. To assemble it is the same as the original, you need 4x M3x4 countersunk screws to screw the cover on the body. If…
Simple little print to toss your used craft knife blades into. Toss in the trash once full. Holds about 30 blades
Small case for holding 100 No 11 Exacto blades. Prints without supports, PLA or PETG, 0.20 layer height or better
Friction cap for some Exacto knives. Prints without supports. PLA is best, but PETG also works. 0.20 layer height or better.
A Gridfinity based holder for the excellently designed XACTO knife by SolidDorks . This allows up to 4 knives to be easily stored vertically. Gridfinity is an open storage system created by Zack Freedman.
Holds an x-acto knife point-down without a cap for easy grabbing! Optionally holds this blade holder: https://www.amazon.com/gp/product/B00004Z2U0/
This is basically the exact same model as Propaganda 's Deburring Gridfinity module , but tweaked to hold my generic hobby knifes which have thinner handles (8mm) vs the original model which has more of a 12mm hole. Note, this was such a…
This is a functioning #2 xacto knife cap "with stand" Raft: Yes Support: No Infill: 5% Printed on a Longer lk5 pro with Sunlu clear transparent pla Nozzle temp: 200 Bed temp: 50 It will be snug at first. I just took the blade out and gave…
this is a remix of the Exacto knife keychain by Michel Bauer . I really like his design but I'm a fat-fingered klutz and needed something with longer handle. I moved the eyelet from the blade handle to the base of the sheath and added a…
Thin Hobby Xacto Knife Features compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces better threads for best…
Hobby Xacto Knife with Blade Container Features blade container interchangeable handles compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the…
Retractable Xacto Knife Features compact with retractable blade compatible with no10 and no11 blade Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces…
Update 8/18/21 V2.5 is out, which I believe to be even better than the V2: https://www.prusaprinters.org/prints/74193-v25-better-xacto-knife-handle These handles compensate for an Xacto blade's angle, making the cutting edge parallel with…
Update 8/18/21 V2.5 is out, which I believe to be even better than the V2: https://www.prusaprinters.org/prints/74193-v25-better-xacto-knife-handle Update 2/25/21: I changed the design a little bit so that the small part that the blade is…
![[REMIX] Xacto OTF Keychain mini V3.0](https://media.printables.com/media/prints/3aadbecf-62d3-4605-8569-0459c62afbf4/images/9674904_6a377821-e844-48d4-bb49-119ae7b8ce75_075f36fc-d66e-40c0-9199-dbf7b0056f67/bildschirmfoto_4-5-2025_163648_mediaprintablescom.jpeg)
