1 / 3

Hobby Xacto Knife

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thin Hobby Xacto Knife

Aktualizacja u źródła: 4 cze 2025

Informacje o modelu

Thin Hobby Xacto Knife

be careful
- this is a very tight fit, your printer must be well calibrated
- the classic perimeter generator produces better threads
- for best result, print each part separately
- try to fit the test blade to avoid injury
- print the test handle and collar first
print settings
- use default 0.20mm QUALITY PrusaSlicer Settings
  - avoid crossing perimeters : recommended
  - nozzle diameter : 0.40 mm
  - layer height : 0.20
  - filament : PETG
  - supports : none
  - brim : none
test_handle, thin_handle and collar
- classic perimeter generator : recommended
- perimeters : 3 or 4
blade_cover
- default 0.20mm QUALITY PrusaSlicer Settings
test_blade
- default 0.10mm DETAIL PrusaSlicer Settings

you may need to clean the chuck jaws
- pass an Xacto blade between each jaws
  - be careful not to break anything ;-)
screw the collar to the chuck
- make sure the collar is facing the right way
- turn clockwise to tighten the chuck (and lock the blade in place)
- turn counterclockwise to loosen the chuck (and release de blade)
insert the blade into the jaw
- make sure you insert the blade into its slot
- tighten chuck until blade is secure
clip the blade cover to the collar