1 / 3
Hobby Xacto Knife
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin Hobby Xacto Knife
- Rating
- 4.5 / 5
- Likes
- 62
- Downloads
- 428
- Makes
- 4
- Views
- 2,002
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Thin Hobby Xacto Knife
Features
- compatible with no11 blade
- blade cover include
Print Instructions
- be careful
- this is a very tight fit, your printer must be well calibrated
- the classic perimeter generator produces better threads
- for best result, print each part separately
- try to fit the test blade to avoid injury
- print the test handle and collar first
- print settings
- use default 0.20mm QUALITY PrusaSlicer Settings
- avoid crossing perimeters : recommended
- nozzle diameter : 0.40 mm
- layer height : 0.20
- filament : PETG
- supports : none
- brim : none
- use default 0.20mm QUALITY PrusaSlicer Settings
- test_handle, thin_handle and collar
- classic perimeter generator : recommended
- perimeters : 3 or 4
- blade_cover
- default 0.20mm QUALITY PrusaSlicer Settings
- test_blade
- default 0.10mm DETAIL PrusaSlicer Settings
Assembly
- you may need to clean the chuck jaws
- pass an Xacto blade between each jaws
- be careful not to break anything ;-)
- pass an Xacto blade between each jaws
- screw the collar to the chuck
- make sure the collar is facing the right way
- turn clockwise to tighten the chuck (and lock the blade in place)
- turn counterclockwise to loosen the chuck (and release de blade)
- insert the blade into the jaw
- make sure you insert the blade into its slot
- tighten chuck until blade is secure
- clip the blade cover to the collar