Da Vinci 1.0 Pro Anti Z-Wobble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IMPORTANT NOTE: Even though I did not see any problems with print quality, I do no longer recomend to use this part.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
IMPORTANT NOTE:
Even though I did not see any problems with print quality, I do no longer recomend to use this part. After having seen quite a few other printers, it seems that this is designed on purpose to allow some play for the threaded rods.
INITIAL RELEASE NOTES:
I made this shorter so that the z axis is not held on the thread but rather on the top. I also increased the size of the base.
All the holes are too small on purpose. I used a drill after printing them to get the holes very precise. The hole for the z axis needs to be 5.05 mm. I froze the part and used a 5mm drill, after warming it again the size of the hole fits perfectly.
I also use some silicon before mounting it for lubrication.
Print Settings
Printer:
Da Vinci 1.0 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm layer at 20mm/s
Infill:
100%
Notes:
I printed is slowly for high precision.
Category: 3D Printer Accessories