1 / 3
Da Vinci 1.0 Pro Anti Z-Wobble — image 1
1 / 3

Da Vinci 1.0 Pro Anti Z-Wobble

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

IMPORTANT NOTE: Even though I did not see any problems with print quality, I do no longer recomend to use this part.…

Rating
0 / 5
Likes
4
Downloads
53
Makes
0
Views
329
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

IMPORTANT NOTE:

Even though I did not see any problems with print quality, I do no longer recomend to use this part. After having seen quite a few other printers, it seems that this is designed on purpose to allow some play for the threaded rods.

INITIAL RELEASE NOTES:

I made this shorter so that the z axis is not held on the thread but rather on the top. I also increased the size of the base.

All the holes are too small on purpose. I used a drill after printing them to get the holes very precise. The hole for the z axis needs to be 5.05 mm. I froze the part and used a 5mm drill, after warming it again the size of the hole fits perfectly.

I also use some silicon before mounting it for lubrication.

Print Settings

Printer:

Da Vinci 1.0 Pro

Rafts:

No

Supports:

No

Resolution:

0.2mm layer at 20mm/s

Infill:

100%


Notes:

I printed is slowly for high precision.

Category: 3D Printer Accessories

Tags