Skadis Holder for the Bowden Speed Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for the Bowden Speed Loader that can be mounted onto an IKEA Skadis panel.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This simple design holds your Bowden Speed Loader by MrFlippant.
It's meant to be mounted to an IKEA Skadis panel for quick access.
Alternatively you could modify the holder (step file included) to mount it to other surfaces or attach it to the printer's frame via magnets.
Print Instructions
Simply print it in PLA or as I did in PETG. Standard print settings are fine. No supports are needed.
Installation
I am using printed M3 t-nuts to mount the holder to the Skadis panel. Good options can be found here:
https://www.printables.com/model/1156750-t-nut-for-skadis-board-interference-threaded
or here:
https://www.printables.com/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un
You will need 2x countersunk M3x12 screws.
Enjoy.