Keysight Agilent 34401A repair power switch push rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keysight Agilent 34401A repair power switch push rod
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The rod of y powerswitch of my old Agilent 34401A multimeter broke, so I decided to rebuil a replacement.
For easy and nice print I spltted it into three parts:
- The pushbottun
- rod part 1
- rod part 2
Because my original rod completely broken, I could not measure. so I build three parts that have to be connexted with M4 screws or M4 thread. this allow also alignment of the length.
The pushbutton is designed to be printed standing, because I liked to have a nice surface of te front of the knob. Therefore I added support in the modell, no further support needed, print it with small brim. I has to be joined with rod part one with a short M4 thread. Just cut off the head of an M4 screew.
The rod part1 and part2 do not need brim. They also have to be joined with a long M4 screw. here you have to adjust the complete lengts .
After fitting the end of rod 2 to the power switch, you have to fix the join with a thread or like i did, with a short wire.