Keysight Agilent 34401A repair power switch push rod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keysight Agilent 34401A repair power switch push rod
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
The rod of y powerswitch of my old Agilent 34401A multimeter broke, so I decided to rebuil a replacement.
For easy and nice print I spltted it into three parts:
- The pushbottun
- rod part 1
- rod part 2
Because my original rod completely broken, I could not measure. so I build three parts that have to be connexted with M4 screws or M4 thread. this allow also alignment of the length.
The pushbutton is designed to be printed standing, because I liked to have a nice surface of te front of the knob. Therefore I added support in the modell, no further support needed, print it with small brim. I has to be joined with rod part one with a short M4 thread. Just cut off the head of an M4 screew.
The rod part1 and part2 do not need brim. They also have to be joined with a long M4 screw. here you have to adjust the complete lengts .
After fitting the end of rod 2 to the power switch, you have to fix the join with a thread or like i did, with a short wire.