Can Recycling Tube / Bag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop your cans down the tube straight into the recycling bag.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
I used to drop my aluminum cans in a paper bag in the garage and them transfer them to the green bags accepted at the recycling center. I designed this to cut out the middle man and have a way to drop them straight into the green bag. Is it overengineered? Yes. Is that why it's so great? Yes. :)
I used a piece of silicone tubing to extend the 3D printed part and hold the mouth of the bag open. The tubing I used can be found here. If you'd prefer not to buy the fancy tubing you can just extend the 3D printed tube to your liking. I will eventually get around to posting a fully 3D printed version.
Recommended print settings: 3 perimeters, 20-25% infill, no supports
Required mounting hardware: 3 #6 sheetrock screws